PIXEL ANGEL

 
 

PIXEL ANGEL optical cleaning fluid is of exceptionally high purity and dries super fast leaving absolutely ZERO residue. It is an outstanding fluid for cleaning the high resolution sensors in today’s digital cameras (when used with the appropriate swabs) and all types of glass optics.


Unlike many general purpose cleaning liquids, PIXEL ANGEL also removes residual oils as well as dust and smears. It is safe for use on today’s nano-coated lenses and will not damage the surface of CMOS and CCD camera sensors, even those without an anti-aliasing filter.


Directions for cleaning optics and lenses:


  1. Blow away any loose dirt, grit and debris.

  2. Dispense several drops of PIXEL ANGEL onto a clean lint-free cloth.

  3. Using light pressure, wipe the lens surface until the dirty area has been cleaned.

  4. If streaks remain, use a clean area of the cloth and re-apply.

  5. Allow any remaining fluid to evaporate naturally.


Directions for cleaning viewfinders:


  1. Blow away any loose dirt, grit and debris.

  2. Dispense several drops of PIXEL ANGEL onto a clean cotton bud.

  3. Using light pressure, wipe the viewfinder surface until the dirty area has been cleaned.

  4. Using the dry end of the cotton bud, dab away any remaining fluid.


Directions for sensor cleaning:


  1. Blow away any loose dirt, grit and debris using a suitable rubber blower.

  2. DO NOT blow using your mouth and DO NOT use compressed air.

  3. Dispense several drops of PIXEL ANGEL onto a clean sensor swab.

  4. With one side of the swab, drag it firmly across the sensor surface in one direction.

  5. Using the opposite side of the swab, drag it firmly across the sensor in the SAME direction.

  6. Allow any remaining fluid to evaporate naturally.

  7. If the sensor needs to be cleaned again, repeat the process using a new swab.



Bring some life back into your camera and optics with Pig Iron PIXEL ANGEL!


For Health & Safety data, see here


 

premium LENS AND SENSOR CLEANING FLUID